Sony Vaio Series - About Changing Your Systems Default Settings

About Changing Your System’s Default Settings
43
About Changing Your System’s Default Settings
How do I change the parallel port type to ECP, EPP, or bi-directional?
You can change the parallel port type using the System Setup utility (CMOS
Setup Utility). To access System Setup:
1 Click Start in the Windows taskbar and select Turn Off Computer. Select
Restart.
2 When the Sony screen displays, press the F2 key on your keyboard.
3 Select the Advanced tab from the Setup Utility screen.
4 Select “I/O Device Configuration” and press Enter.
5 Use the arrow keys to highlight Parallel Port Mode and press Enter.
6 Select the desired setting displays, and press Enter.
7 Press the F10 key to Save and Exit.
How do I change the video resolution of my display?
1 Click Start in the Windows taskbar and then select Control Panel.
2 Select Appearances and Themes, then select “Change the screen resolution.”
3 Click the Settings tab.
4 Change the Screen resolution and Color quality to the desired levels.
5 Click Apply and then click OK.
✍ You can toggle between the Normal (bi-directional), EPP, ECP, and ECP+EPP options
using the directional arrow keys.