EasyManuals Logo

Sony VPL-SX125 Specifications

Sony VPL-SX125
1 page
Page #1 background imageLoading...
Page #1 background image
2,500 lumens (ISO 21118)
Native XGA (1,024x768) resolution
High contrast ratio
Bright Era
®
Panel
Short throw distance (TR= 0.62:1)
Long-lasting lamp
Recommended lamp replacement time 6000h (low mode)*2
Synchronized lamp and filter maintenance cycle
ECO MODE key
Power saving mode
Low power consumption
Closed Captioning
Short Throw Projector
VPL-SX125
XGA / 2,500 lm
Optical
Light Output /
Color Light Output
2500 lumens (Lamp mode: High)
1800 lumens (Lamp mode: Standard)
1400 lumens (Lamp mode: Low)
LCD Panels 0.63”x3 BrightEra LCD Panel
Panel Display Resolution XGA (1024x768 dots)
Contrast Ratio 3,800:1 (Full white/full black) *
1
Light Source Ultra high-pressure mercury lamp 210 W type
Recommended Lamp
Replacement Time*
2
3000H (Lamp mode: High)
4500H (Lamp mode: Standard)
6000H (Lamp mode: Low)
Filter Cleaning Cycle *
2
Max. 6000H
Same time as the lamp replacement is recommended
Projection Lens
Focus Manual
Throw Ratio 0.62:1
Screen Size 50” to 110”
Interface
Computer and
Video
Input/Output
INPUT A
Mini D-sub 15-pin (RGB/Y Pb Pr)
Audio: Stereo mini jack
INPUT B
Mini D-sub 15-pin
Audio: Stereo mini jack
VIDEO IN
Pin Jack
Audio : Pin jack (x2) (shared with S VIDEO IN)
S VIDEO IN
Mini DIN 4-pin
Audio : Pin jack (x2) (shared with VIDEO IN)
Monitor OUT Mini D-sub 15-pin (from INPUT A and B)
Audio OUT Stereo mini jack (variable out)*
3
Other Signal
Input / Output
RS-232C D-sub 9-pin
LAN RJ45, 10BASE-T/100BASE-TX
General
Speaker 1Wx1 (monaural)
Scanning Frequency H: 19 to 92 kHz, V: 48 to 92 Hz
Display
Resolution
Computer
Signal Input
Maximum display resolution :
1400x1050 dots (resizing display)
Video
Signal Input
NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p,
576/50p, 720/60p, 720/50p, 1080/60i,
1080/50i
Color System
NTSC3.58, PAL, SECAM, NTSC4.43,
PAL-M, PAL-N, PAL60
UPC Code 0 27242 82406 5
Power Requirements AC 100 V to 240 V, 3.0 A to 1.3 A, 50 Hz/60 Hz
Power Consumption
290 W/240 W/205 W (AC 100 V-120 V)
275 W/225 W/190 W (AC 220 V-240 V)
Standby Mode
Power Consumption
3 W (Std)/<1.0 W (Low) (AC 100 V-120 V)
3 W (Std)/<1.0 W (Low) (AC 220 V-240 V)
Dimensions (WxHxD)
(without protrusion)
313.4x144.9x349.3 mm
12 11/32x5 23/32x13 3/4 ”
Mass 3.7 kg/8 lb 3 oz
Optional Accessories
Replacement Lamp LMP-E211
Replacement Filter
4-170-764-01 (DOOR, FILTER)
4-170-765-01 (Mesh, FILTER)
(Filters are cleanable)
Replacement Remote 1-489-222-11 (RM-PJ7)
*
1
Average with lamp dimming.
*
2
Expected maintenance times not guaranteed. Lamp and filter performance vary based on
operating environment and use.
*
3
Works as an audio switcher function. Output from a selected channel, not available in standby.
Connector Panels
Key Features
Dimensions (Front)
Dimensions (Bottom)
Unit: mm (inches)
©2011 Sony Corporation All rights reserved. Reproduction in whole or in part without written permission is prohibited. Features and specifications subject to change without notice.
Sony, Bright Era, and the Sony and make.believe logo are trademarks of Sony.

Other manuals for Sony VPL-SX125

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony VPL-SX125 and is the answer not in the manual?

Sony VPL-SX125 Specifications

General IconGeneral
Brightness2500 ANSI Lumens
ResolutionXGA (1024 x 768)
Contrast Ratio2000:1
Display Technology3LCD
Native ResolutionXGA (1024 x 768)
Aspect Ratio4:3
Projection Size30 to 300 inches
Lamp TypeUHP
Input PortsHDMI, VGA, Composite Video, S-Video
Power Consumption310W (High) / 250W (Standard)
Display TypeLCD

Related product manuals