Sony Walkman MZ-R30 - Recording with Digital Input; To Start;Stop Recording with the Player (Synchro-Recording)

Various ways of recording
11
Recording with digital
input
This unit has
converter so that you can record
programs from digital equipment using
other sampling rates, such
or a DAT deck.
Insert a recordab
recording.
To record, see “Recording an MD
away !” (page 6).
portable CD player, set
pause and then sta
LINE IN (OPTICAL) jack is
digital and analog
The recorder automatically
line cable and sw
input.
Notes
•You can make a digital
an optical type output.
•Some portable CD players
wi
system cannot send out dig
when it is activa
ESP system.
* Electronic Shock Protection
To start/stop recording with
the player
(Synchro-recording)
You can easily make digital recordings of
a digital source on an MD.
Before synchro-recording, make
connections to the digital source with a
digital cable and the power source, and
insert a recordable MD.
1 Slide SYNCHRO REC to ON.
“SYNC” appears in the display.
2 Slide REC to the right while pressing
its button.
The recorder stands by for recording.
Play the source player. The recorder
starts recording when it receives the
playing sound.
To stop recording, press p.
z
When there is no sound from the player
more than 3 seconds during synchro-
recording, the recorder stands by for
recording automatically. When the sound
comes from the player again, the recorder
starts synchro-recording again.
Notes
•Do not switch SYNCHRO REC after step 2.
Recording may not be made properly.
•If you record in monaural, do steps 1 and 2
in “Recording in monaural for double the
normal recording time of an MD” (page 12)
before doing the synchro-recording steps.
SYNC
SYNCHRO REC
Portable CD
player, etc.
Optical
mini-
plug
Optical
plug
CD player, MD player,
digital amplifier, etc.
POC-15B etc.
(not supplied)
POC-15AB etc.
(not supplied)
to LINE IN
(OPTICAL)