When point A (starting point of A-B repeat) is set, if you press the button within 3
seconds of point A, playback returns to point A.
To set a specified section repeatedly (A-B Repeat)
You can set a specified section (from point A to point B) on an audio file, and play back this
section repeatedly.
Operation guidance
Section A-B
Point B
Point A
1. Press the
button to specify the starting point of A-B repeat.
2. Press the
button to specify the ending point of A-B repeat.
Note
Allow for an interval of at least 1 second between point A and B. If you press the button
within 1 second from point A, you cannot set point B.
When point B (ending point of A-B repeat) is not set, the section from point A to the end of
the audio file is played back repeatedly.
A-B repeat operations
During A-B repeat, you can pause, resume playback, fast forward, fast rewind and [Quick
Replay] as usual [Details]. In addition to that, you can perform the following operations.
To Do this
Return to point A Press the
button.
Proceed to point B and exit A-B repeat Press the button.
Exit A-B repeat Press the button.
Related Topics
About language study
Go to page top
Copyright 2012 Sony Corporation
To Next Page
Loading...
