PLAYBACK
CONNECTION
For playback through speakers
For playback through the headphones
I
OPERATION
peaklbattery indication
selector
-
to
PEAK
1
Insert a cassette.
5
Adjust the volume of the headphones with
2
Set the TAPE selector to the appropriate
the HEADPHONE VOLUME control.
position.
3
For Dolby 0-type NR processed tape, set
the DOLBY NR selector to 0-TYPE.
For Dolby C-type NR processed tape, set it
to C-TYPE.
For non-Dolby NR processed tape, set it to
OFF.
4
Depress the
b
PLAY button. Playback will
begin.
Adjust the volume of the speakers with
the volume control of the amplifier.
To stop the tape during playback, press the
1.
button.
To rewind the tape, press the REVIEW
button.
To advance the tape rapidly, press the
H
CUE button.
To Next Page
Loading...
