SERVICE MANUAL
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
XM-GTX6020/GTX6022
SPECIFICATIONS
STEREO POWER AMPLIFIER
9-889-723-01
2009L04-1
©
2009.12
AEP Model
UK Model
E Model
XM-GTX6020
Indian Model
XM-GTX6022
Ver. 1.0 2009.12
Circuit system OTL (output transformerless) circuit
Pulse power supply
Inputs RCA pin jacks
High level input connector
Input level adjustment range
0.3 – 6 V (RCA pin jacks),
2.8 – 12 V (High level input)
Outputs Speaker terminals
Speaker impedance 2 – 8 Ω (stereo)
4 – 8 Ω (when used as a bridging amplifi er)
Maximum output 110 W × 2 (at 4 Ω)
350 W (BTL, at 4 Ω)
Rated output (supply voltage at 14.4 V, 20 Hz – 20 kHz, 1 % THD)
60 W × 2 (at 4 Ω)
75 W × 2 (at 2 Ω)
150 W (BTL) (at 4 Ω)
Frequency response 5 Hz – 50 kHz ( dB)
Harmonic distortion 0.05 % or less (at 1 kHz, 4 Ω)
Low-pass fi lter 80 Hz, 18 dB/oct
Power requirements 12 V DC car battery (negative ground)
Power supply voltage 10.5 – 16 V
Current drain at rated output: 15 A (4 Ω, 60 W × 2)
Remote input: 1 mA
Dimensions Approx. 312 × 55 × 200 mm (w/h/d)
not incl. projecting parts and controls
Mass Approx. 1.8 kg not incl. accessories
Supplied accessories Mounting screws (4)
High level input cord (1)
Protection cap (1)
Design and specifi cations are subject to change without notice.
+0
–3
Unit: mm
Unité: mm
Unidad: mm
Dimensions / Dimensions / Dimensiones
251
55312
182
200
ø 6251
To Next Page
Need help?
General
Weight and Dimensions
