Sony XS-L101P5 User Manual

Design and Specifications subject to change without notice.
XS-L101P5
10” Component Subwoofer
2003 SONY MOBILE
PRODUCT GUIDE
Impedance 4W Vas (Lit.) 36.6
d (mm) 217 Vas (Cu.ft) 1.29
d (inch) 8.5 Mms (g) 149.2
Rdc (W) 2.4 Lvc (mH) 0.9
Fs (Hz) 29.7 Xmax (mm) 7.9
Qts 0.45 Xmax (inch) 0.3
Qes 0.48 BL (Tm) 11.8
Qms 6.62 Enclosure vol. (Net) 20 Lit. (0.70 cu.ft)
Recommended Enclosure: Sealed type
Specifications
Speaker Woofer 25 cm (10 in.), cone type
Peak power 1,100 watts
Rated power 300 watts
Impedance 4 ohms
Sensitivity 88 dB/W/m
Frequency response 18  2,500 Hz
Mass Approx. 4.5 kg (9 lb. 15oz.) per speaker
Supplied accessory Parts for installation
 10 Polypropylene Cone
 1100W peak power (300W RMS)
 Unique cone design offers superior rigidity
 Gold-plated Binding Posts
 Small sealed/ported enclosure optimized
 4W Voice Coil
Thiele/Small Parameters
Dimensions
ø258 (10 1/4)
10 - ø5.5(7/32)
ø273 (10 3/4)
ø232 (9 1/4)
144 (5 3/4)
Unit: mm (in.)

Sony XS-L101P5 Specifications

General

Size	10 inches
Impedance	4 Ohms
Voice Coil Diameter	2.5 inches
Mounting Depth	5.5 inches
Basket Material	Steel
Surround Material	Rubber
Cone Material	Polypropylene
Type	Subwoofer
Power Handling (RMS)	350 Watts
Frequency Response	20Hz - 1kHz

Summary

Product Specifications

Speaker Details

Describes the speaker type and cone material for the subwoofer.

Power Handling

Details the peak and rated power handling capabilities of the subwoofer.

Electrical and Performance Data

Lists impedance, sensitivity, frequency response, and mass.

Included Accessories

Specifies the parts provided for installation.

Key Features

Highlights important design elements like cone material and voice coil.

Thiele/Small Parameters

Electrical and Mechanical Parameters

Provides a comprehensive list of Thiele/Small parameters for the subwoofer.

Recommended Enclosure Type

Specifies the recommended enclosure type for optimal performance.

Product Dimensions

Dimensional Drawings

Illustrates the subwoofer's dimensions in both top and side views.

Measurement Units

Indicates that dimensions are provided in millimeters and inches.