Sony XS-MP1650W Specifications

6 1/2" Polypropylene Woofer Cone
Ferrite Magnet
Dome Tweeter
In-line Crossover
UV and Salt Water Resistant
180W Max Power (50W Rated)
Specications
© 2009 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony, Memory Stick, nav-u, Quick-BrowZer, Walkman,
Xplod, ZAPPIN, and the Sony, nav-u and Xplod logos are trademarks of Sony. iPhone and
iPod are trademarks of Apple Inc., registered in the U.S. and other countries. Bluetooth is
a trademark of Bluetooth SIG, Inc. NAVTEQ Maps & Trac is a trademark of NAVTEQ. All
other trademarks are trademarks of their respective owners. Features and specications
are subject to change without notice. Non-metric weights and measures are approximate.
/Updated: December 15, 2011
Audio
Frequency Response
35-26,000 Hz
Impedance
4 ohms
Sensitivity (db)
90 dB/1W/1m
General
Magnet
Ferrite
Material
Polypropylene / PEI
Power
Power Handling Capacity
180 watts
Rated Input
50 watts
Weights and Measurements
Depth (Approx.)
2 1/2"
Diameter (Approx.)
6 1/2"
Dimensions (Approx.)
6 1/2" (165mm)
Dimensions (Approx) Depth
2 1/2"
Supplied Accessories
Supplied Accessories
Parts for Installation
XS-MP1650W
6 1/2" Marine component speaker

Sony XS-MP1650W Specifications

General

Speaker Type	Coaxial
Size	6.5 inches
Power Handling (Peak)	300 Watts
Impedance	4 Ohms
Frequency Response	45 Hz - 22 kHz
Sensitivity	90 dB
Water Resistance	Yes
Woofer Material	Polypropylene