The (BLUETOOTH) indicator and the ST PAIR (Stereo Pair) indicator flash.
Check the state of the indicator on each of the 2 speakers.
When the speakers are connected by the Stereo Pair function, you hear voice guidance (Left/Right) from the
speaker, then the ST PAIR (Stereo Pair) indicators on both speakers stay lit and the
(BLUETOOTH) indicator on
the second speaker turns off.
Hint
When the 2 speakers are immediately connected by the Stereo Pair function, the
(BLUETOOTH) indicator and the ST
PAIR (Stereo Pair) indicator may not flash and the ST PAIR (Stereo Pair) indicator may light instead.
Set up the second speaker within 1 minute. If you do not set it up within 1 minute, the setting of the first speaker will be
canceled.
4
Operate the speaker of which the
(BLUETOOTH) indicator is flashing to make a BLUETOOTH connection
with a BLUETOOTH device.
When the BLUETOOTH connection is established, you hear the notification sound from the speaker and the activity
of the
(BLUETOOTH) indicator changes from flashing to lit.
5
Start playback on the BLUETOOTH device, and adjust the volume to moderate level.
6
To Next Page
Loading...
