(BLUETOOTH) indicator (blue)
ST PAIR (Stereo Pair) indicator (white)
Flashes
Each time you press the –/+ (volume) buttons, the indicator flashes once.
When you operate the –/+ (volume) buttons and the volume is set at the lowest (0) or highest (50 for
music playback/15 for phone calling) level, the indicator flashes 3 times.
When the
(play)/ (call) button and the – (volume) button are pressed and held simultaneously
for about 5 seconds and the Auto Standby function is turned off, the indicator flashes 3 times.
When the
(play)/ (call) button and the – (volume) button are pressed and held simultaneously
for about 5 seconds and the Auto Standby function is turned on, the indicator flashes twice.
When the
(play)/ (call) button and the (BLUETOOTH) button are pressed and held
simultaneously for about 2 seconds and the “Priority on Stable Connection” preference is selected for
the BLUETOOTH connection quality, the indicator flashes 3 times.
When the
(play)/ (call) button and the (BLUETOOTH) button are pressed and held
simultaneously for about 2 seconds and the “Priority on Sound Quality” preference is selected for the
BLUETOOTH connection quality, the indicator flashes twice.
Lights up The speaker is connected to a BLUETOOTH device.
Double flashes
The speaker enters the pairing mode.
Flashes slowly
The speaker is waiting for a BLUETOOTH connection to be established.
Flashes
The speaker is waiting for a connection for the Stereo Pair function to be established. The ST PAIR (Stereo
Pair) indicator flashes when the connection for the Stereo Pair function fails.
To Next Page
Loading...
