Hint
As long as the speaker is connected to an AC outlet by a USB AC adaptor (commercially available), you can change the
BLUETOOTH connection quality while the speaker is turned off as well.
When using the Stereo Pair function, the codec automatically switches to SBC.
Note
While the “Priority on Sound Quality” preference is selected, noise or sound interruption may occur depending on the setting of
your BLUETOOTH device and ambient conditions. In such a case, change the BLUETOOTH connection quality to the “Priority on
Stable Connection” preference.
Related Topic
Supported codecs
What you can do with “Sony | Music Center”
5-057-417-11(1) Copyright 2024 Sony Corporation
Tap [ULT FIELD 1].3.
Tap [Settings] - [Sound] - [Bluetooth Connection Quality], and then select [Priority on Sound Quality] or [Priority
on Stable Connection].
All the connections with BLUETOOTH devices are automatically disconnected and reestablished, and then the
preference turns effective.
4.
To Next Page
Loading...
