Help Guide
Wireless Speaker
ULT FIELD 1
Unable to connect a BLUETOOTH device with the speaker for the Stereo Pair function
Update the pre-installed software to the latest version on each speaker to connect for the function.
(For details about the update procedure, see Updating the pre-installed software.)
Update “Sony | Music Center” to the latest version before setting up the Stereo Pair function.
For details about “Sony | Music Center,” refer to the following URL:
https://www.sony.net/smcqa/
Make sure that the 2 speakers to connect for the function are located within 1 m (3.2 ft) from each other.
While music playback is in progress, stop the playback before setting up the Stereo Pair function.
Related Topic
Listening to music wirelessly with 2 speakers (Stereo Pair function)
What you can do with “Sony | Music Center”
Updating the pre-installed software
5-057-417-11(1) Copyright 2024 Sony Corporation
To Next Page
