Soosan
H
draulic Breaker
Soosan Heav
Industries Co.
Ltd
inspection or repair. Therefore the warnings in this manual are not all inclusive. If an operation, inspection or
repair not described in this manual is used, you must take measures for safety by yourself.
.
Observe the cautions and take a preventive measure for safety
The Soosan Hydraulic Breaker will provide safe and dependable service if operated in accordance with the
instructions given in this manual. Read and understand this manual, any decals and tags attached to the
breaker before operation. Failure to do so could result in personal injury or equipment damage
■ Operate the breaker in accordance with all laws and regulations which affect you, your equipment, and the
worksite.
■ Do not operate the breaker until you have read this manual and thoroughly understood all safety, operation
and maintenance instructions.
■ Do not operate the breaker until you have read the carrier equipment manual and thoroughly understood
backhoe or excavator or similar equipment used to operate the breaker. The word "carrier", as used in this
manual, means a backhoe or excavator or similar equipment used to operate the breaker.
■ Ensure that all maintenance procedures recommended in this manual are completed before using the
equipment.
■ The operator must not operate the breaker or carrier if any people are within the area where they may be
injured by flying debris or movement of the equipment.
■ Know the limits of your equipment.
■ Before starting a work, Check the prohibitions, cautions and working processes in a working site with the
field overseer, Observe all of them strictly.
■ Wear such protective tools as a helmet, safety shoes, etc. to perform a work.
Make use of the protective glasses, earplugs, gloves and other protective tools if necessary.
■ Establish a training program for all operators to ensure safe operation. Do not operate the breaker unless
thoroughly trained or under the supervision of an instructor. Become familiar with the carrier controls before
operating carrier and breaker. While learning operate the breaker and carrier, do so at a slow pace. If
necessary, set the carrier to the slow position.
■ Make sure all controls(levers and pedals) are in the neutral position before starting the carrier.
■ Before leaving the carrier, always lower the boom and insure the carrier is stable. Never leave the machine
with the engine running. Always engage the parking brake.
■ Stop the engine before attempting to make any repairs, adjustments or servicing to either the carrier or the
breaker.
■ Do not operate the breaker at oil temperature above 175℉/80℃. Operation at higher temperature can
damage the internal components of the breaker and carrier and will result in reduced breaker performance.
■ Do not operate a damaged, leaking, improperly adjusted, or incompletely assembled breaker.
■ Do not modify this breaker in any manner.
■ Use only breaker parts manufactured by Soosan. Usage of breaker rod produced by another manufacturer
may damage the breaker and will void the warranty.
■ To avoid personal injury or equipment damage, all breaker repair, maintenance and service must only be
performed by authorized and properly trained personnel.
■ If you do not understand how to operate safely your breaker, contact an authorized Soosan Dealer for
DANGER
To Next Page
Loading...