Soosan SB70 - Daily Inspection before opearting

Soosan H
y
draulic Breaker
Soosan Heav
y
Industries Co.
,
Ltd
■ Daily Inspection before opearting
Be fore starting operation, be sure to inspect the breaker referring to the following table.
Inspection Item Inspection Point Remedy
- Looseness, missing and
damage to bolts and nuts
- Through bolt
- Bracket mounting bolt
- Check looseness.
- Retighten to correct
Tightening torque.
- Looseness of hose fittings,
visible damage to hoses &
oil leakage
- Hydraulic piping for breaker
- Oil hose
- Retighten sufficiently.
- Replace when damaged.
- Abnormal oil leakage
- Connection of back head
and cylinder
- Gap between front head
and rod
※ But small leakage is
normal.
- Consult with Soosan for
further inspection.
- Abnormal wear and cracks
rod.
- rod - If the rod is deformed,
burred and worn out,
be repaired.
- If the rod is excessively
worn out, be replaced.
- If the rod is cracked, be
replaced.