Sophos XGS 3100 Quick Start Guide

4
2. Mount and Connect the Appliance
Please follow the rack mounting instructions as described in the XGS Operating Instructions Guide
*
or the
separate instructions provided with your rack mount rails.
Connect the ports to the internal and external networks
1. Connect the MGMT port via a switch to the internal network. For this purpose, use the RJ45 Ethernet
cable provided. Note that your Administration PC must also be connected to this network.
2. Connect Port 2 to the external network. The connection to the WAN depends on the type of Internet
access.
XGS appliances are shipped with the following default settings:
Ethernet Port IP Address Zone
1/LAN 172.16.16.16/255.255.255.0 LAN
2/WAN DHCP WAN
MGMT 10.0.1.1/255.255.255.0 LAN
Admin Console Username Admin Console Password CLI Console Password
admin admin admin
Default Gateway DNS DHCP Service
DHCP DHCP Enabled
* Available at www.sophos.com/firewall-documentation
Quick Start Guide XGS 2100/2300/3100/3300
ENGLISH

Sophos XGS 3100 Specifications

General

Brand	Sophos
Model	XGS 3100
Category	Firewall
Language	English