28
MAINTENANCE
LENS HOUSING REMOVAL
After using ARIS in a high-silt environment, the lens housing should be removed for cleaning. Using silt plugs minimizes
how often this needs to be done.
Tools Needed:
• Fix It Sticks (x2)
• 3 mm Hex Driver
STEP 1
Before powering down the ARIS, click on the Advanced
button and then click Home.
BALL END 3 mm HEX DRIVER
STEP 2
Insert one of the Fix It Sticks through the center of the
second Fix It Stick to create a handle for the driver.
Note: Make sure the 3 mm Hex Driver is fixed at the end.
To Next Page
Loading...