2
DISCLAIMER
PLEASE READ THE ENTIRE MANUAL BEFORE USING THE ARIS EXPLORER
!
• IMAGES SHOWN IN THE MANUAL ARE FOR REPRESENTATIONAL PURPOSES ONLY; ACTUAL APPEARANCE OF PRODUCTS MAY VARY
• SOUND METRICS RESERVES THE RIGHT TO CHANGE ANY INFORMATION IN THIS MANUAL WITH OR WITHOUT NOTIFICATION
WARNING:
• MISUSE OF EQUIPMENT CAN RESULT IN SAFETY HAZARDS
• DO NOT POWER ON SYSTEM WITHOUT FULLY ENGAGING ALL
CONNECTORS - CONNECTORS MUST BE FIRMLY TIGHTENED BY HAND
UNTIL CONNECTOR STOPS TURNING AND PROVIDED GAUGE CAN NOT
FIT BETWEEN CONNECTOR GAP
• DO NOT DISCONNECT CABLES WHILE SYSTEM IS UNDERWATER
OR POWERED ON; POWER MUST BE OFF BEFORE DISENGAGING
CONNECTORS
• DO NOT OVERTIGHTEN SCREWS; OVERTIGHTENING SCREWS CAN
DAMAGE UNIT - APPROVED TORQUE IS AS FOLLOWS:
2.5 Nm — M4 SCREWS, 5 Nm — M5 SCREWS, AND 25 Nm — M8 SCREWS
• DO NOT ATTEMPT TO REPAIR EQUIPMENT
• FAILURE TO FOLLOW ABOVE INSTRUCTIONS WILL VOID WARRANTY
CAUTION:
GAUGE NO LONGER FITS BETWEEN CONNECTOR GAP
To Next Page
Loading...
