Screen 1
Screen 2
Cal Check
This option will play a calibration test noise at 60 dB(a) measured at 75
cms from the main speaker. For the Parrotplus2 , if a test in noise is
selected, you will be required to press any key after the first burst of
noise. This will give you the opportunity to re-align your sound level
meter. The unit will then play a burst of noise through speaker 2. This
will again be at 60 dB(a) measured at 75 cms ( or 100cms if selected)
from the speaker.
Select Toys
This menu enables you to remove the pairs of toys you do not wish to be
included in the test.
The symbol at the bottom of the screen indicates that there are further
options available if you scroll down. A symbol at the top of the screen
indicates that more options are available if you scroll up.
To Next Page
Loading...