Noise Type
This option returns you to the select a test menu
This allows you to change the type of noise the test is presented in at any
time. Use the [Menu] key in this menu to exit the test completely and
return to the select a test group menu.
Return
Selecting this option will return you to the selected Setup test screen.
(see page 7).
Exit Test
Selecting this option will return you to the initial Select a test group menu.
(see page 7).
Noise Cal Distance
Select this option to change the calibration distance for speaker 2 on the
Parrotplus 2 only. The calibration distance for the noise source can be
changed from 75cm to 100 cm and remains set until you select this menu
option again, or power the unit down.
To Next Page
Loading...