Chear Test Options Menu
Use the [up] and [down] keys to change the highlighted option.
Use the [Select] key to select the highlighted option.
Use the [Menu] key to return to the Setup test screen (see page 10).
Cal Check
This option will play a calibration test noise at 60 dB(a) measured at 75
cms from the main speaker. For the Parrotplus 2 , if a test in noise is
selected, you will be required to press any key after the first burst of
noise. This will give you the opportunity to re-align your sound level
meter. The unit will then play a burst of noise through speaker 2. This
will again be at 60 dB(a) measured at 75 cms ( or 100cms if selected)
from the speaker.
Test Mode
This menu allows you to change the playback test mode from auto to
manual. In Manual Test mode you will have to press the [Select] key each
time a new word is to be spoken. In Auto Test mode, the test will
automatically run through a complete sequence without intervention.
Noise type
This option allows the user to change the type of noise the test is
presented in.
To Next Page
Loading...