6.5.5: OUTPUT
INPUT CHANNEL > OUTPUT BLOCK: PAN, INSERT, DIR OUT, DELAY
Insert Trim
Adjust the actual send signal level.
Insert On
Activate the insert point.
Direct Output On
Activate the Direct Output for this input channel.
Direct Output Gain
Adjust the gain of the channel's Direct Output.
Direct Output Point
Select the point in the input channel's signal path for the Direct Output 'tap'.
Options are pre filters, post-filters/Pre-processing, post-processing/pre-fader, or post-fader.
Direct Output Patch
Select and assign physical I/O for the direct output.
Opens a patching screen in the corresponding Vistonics touch screen area.
To Next Page
Loading...
Need help?
General
