TIP
RING
SLEEVE
GROUND
SIGNAL
JACK signal connector
TIP
SLEEVE
GROUND
SIGNAL
FROM MIXER
AUDIO CABLE WITH SHIELD
FROM MIXER
AUDIO CABLE WITH SHIELD
TIP
RING
SLEEVE
JACK power connector
TIP
SLEEVE
- NEGATIVE
+ POSITIVE
TO SPEAKER
- NEGATIVE
+ POSITIVE
POWER CABLE
TO SPEAKER
POWER CABLE
HOOK UP DIAGRAM
S P EAKER OUTPUTS
I N PUTS
AC ~ 1 2V
O UT PU T
F US E
AC ~
STD.
FUSE
AC~
WARNING
CAUTION: FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE REPLACE WITH
SAME TYPE AND VALUE FUSE INDICATED.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE
OF ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
TIP
SLEEVE
GROUND
SIGNAL
GROUND
SIGNAL
4 oh m at l ea st
GROUND
SIGNAL
4 oh m at l ea st
TIP
SLEEVE
GROUND
SIGNAL
CH2
CH1
MASTER OUT
CH2
CH1
CONNECTORS
The upper diagrams show the wiring of the connectors that can be used with this series amplifiers. To connect the mixer
outputs to the inputs, always use audio cable with shield. To connect the amplifier to the loudspeaker enclosures, always
use power cables (speaker cables made up of two wires, normally with a large cross-section).
To Next Page
Loading...