4
INSTRUCTIONSFORUSE
ChargingInstructions
TheBluetoothEarbudscomewithabuiltinrechargeablebattery .Beforeusingitforthefirst
timewerecommendyouchargethebatteryfully.OnlyusethesuppliedUSBCordtocharge
theBluetoothEarbuds.Pleasechargeforabout2‐3hours.
Connect the USB charging cable to a
computer USB port and the Micro USB plug to the
chargingportofthedevice.TheRedLEDlightturnsonwhilethedeviceischarging.Ittakes
2‐3 hours for the unit to fully charge. When the battery is fully charged, the LED light will
turnoff.
Switching
on/offthedevice
PressandholdtheMFbuttonfor2‐3secondstoturn ON/OFFthedevice.
PairingthedevicewithBluetoothdevices(phoneormusicdevice)
Ensurethedeviceisturnedoff,thenpressandholdtheMFbuttonfor2‐3secondstoturnon.
An indication tone
will be heard, and the LED flashes blue rapidly. Place the Bluetooth
EarbudsandBluetoothdevice(phoneormusicdevice)sothattheyarenofur therthan3feet
apart;
Activate the Bluetooth function on your Bluetooth device (phone or music device). Please
refer to the manufacturer’s instructions for instructions
on enabling Bluetooth on your
device.
OnceyouhaveactivatedBluetoothon yourdevice,selectthe “SLBT Earbuds”fromthelist
ofavailableBluetoothdevices.
Ifrequired,enterthepassword‘0000’toconfirm&finalizepairing.
Oncepaired successful,anotherindicationtonewillbe heard,and theblueLED will
flashes
slowly.
Youcannowstarttousethedevice.
Ifpairingisunsuccessful,turnoffthedevicefirstandthenre‐pairfollowingtheabovesteps.
OnceyouhavepairedtheBluetoothEarbudswithadevice,theEarbudswillrememberthis
deviceandwillpairautomaticallywhenthedevice’s
Bluetoothisactivatedandinrange.You
donotneedtore‐pairanypreviouslyconnecteddevices.
TheBluetoothEarbudswi llattempttoautomaticallyconnecttothelastdeviceitwaspaired
with when switched on. If you want to pair it with a new device, please follow the steps
outlined
above.
Once the Bluetooth Earbuds is paired with your devicethe musicwill transmitthrough the
BluetoothEarbuds.Pleaseref ertoyourdevice’susermanualforfurtherinformation.
To Next Page
