EasyManua.ls Logo

SOUNDMASTER SCD7800 - Page 19

SOUNDMASTER SCD7800
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SCD7800 / English Instruction Manual
6
Audio CD:
Press once = the normal play mode. The display will show “Normal”.
Press twice = the current track is repeated continuously. The display will show “Repeat One”.
Press three times = the whole CD is played continuously. The display will show “Repeat All”.
Press four times = all tracks will be played in random order. The display will show “Random”.
Press five times = back to the normal play mode.
MP3-CD:
Press once = the normal play mode. The display will show “Normal”.
Press twice = the current track is repeated continuously. The display will show “Repeat One”.
Press three times = the selected folder is repeated continuously. The display will show “Repeat
Folder”.
Press four times = the whole CD is played continuously. The display will show “Repeat All”.
Press five times = all tracks will be played in random order. The display will show “Random”.
Press six times = back to the normal play mode.
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the “STOP / MENU button.
2. Press the "SCAN / MODE" button. “P_01” flash in the display (P_01 means the program
number).
3. Use the “SKIP + / TUNING +” or SKIP - / TUNING -” buttons to select the desired track and
press the "SCAN / MODE" button again. The display P_01 change to P_02.
4. Select the next track with the “SKIP + / TUNING +or SKIP - / TUNING -” buttons and
press the "SCAN / MODE" button again. Repeat the procedure until all the desired tracks
are selected.
NOTE:
Once the storage capacity of the tracks to be programmed has been reached PROGFULL
will show in the display.
5. Press the PLAY / PAUSE / CLOCK / ENTERbutton to start the programmed playback.
The upper-left of the display will show MEM.
6. Press once the STOP / MENUbutton to stop the playback while retaining the program.
7. To play the programmed back again, press the PLAY / PAUSE / CLOCK / ENTER button.
8. To delete the program, press the “STOP / MENU button twice. The notification “MEM” will
disappear.

Related product manuals