WE320 manual of English
1. General Description
Power supply: DC 6V (4 x AA, Not Include.) or ext. DC adaptor 7.5V DC (Not Include)
Real time clock display with day-flag
12/24 Hour clock display set by user
ATT control for adjust the reception sensitivity of SW Band
Manual high speed tuning with monitoring
Micro step in manual for SW & FM & AM to fine tune radio station frequency
Software Selected MW frequency range & tuning step for usable both Euro & America*
Ascending Alarm--The buzzer sounds progressively faster in 6 levels -
Built in calendar with auto leap year handling within 2000-2099
World time of 34 cities displayed by abbreviation provided
Daylight saving of local city and world time is independently programmable
Alternative display of clock, date and world time is programmable
4 mode dual alarms can be set to daily, weekday, week-end independently and one day only
Alarm output can be set to radio or buzzer.
Programmable Snooze timer function(1-59 minutes)
10 User setting SDA (Special Date Alert)
Sleep timer up to 90 minutes(10-90 minutes)
Stop watch up to 99 minute and 59 second.
AMS
function (Automatic Memory System)
400 memories preset radio station are free allocated for 4 band
Automatic/Manual search Up/Down features are provided
Memory scan feature is provided
Battery-Low Indicator with auto power off function at radio mode
Electronic Volume Control
LCD back light with high-low dimmer
Key lock function to prevent accidental keying
Technical Data
Radio frequency range:
Band Freq. range Freq./Fine
FM 87- 109 MHz 100KHz/50 KHz
SW 5.85 – 17.90 MHz 5 KHz/1KHz
MW(1) 522 - 1656 KHz 9 KHz/1KHz
MW(2) 520 – 1710KHz 10KHz/1KHz
LW 153 - 279 KHz 1 KHz
Power consumption: 5W
Operating temperature: ℃ +5 ~ +35
Read this first
1,Battery:
This unit uses 4 UM3/AA/R6 size 1.5V batteries (not included). Insert batteries correctly with “+” and “–”
polarities as directed inside the battery compartment, wrong polarities insertion will cause damage to the unit.
Do not use new and old batteries together.
If the unit is disconnected from power source, reapplying the electric supply to the unit within 30 seconds can
preserve all settings inside the memory, otherwise, the preset data will be erased, and it is required to re-write
the memory again.
Battery Low Indicator: If the batteries are out of electric power, the low batteries icon goes solid. It is
suggested to replace the old batteries as soon as possible.
It is important to use 7.5V adapter with positive “+” polarity located at interior, as the symbol illustrated
beside the Adapter Input. Use adapters with wrong polarity or voltage will cause damage to the unit.
1
To Next Page
Need help?
General
