SoundPeats RunFree Lite User Manual

SOUNDPEATS RunFree Lite User Guide
Pairing
1. Press and hold the power button for 3s to turn on the headset. The headset will enter the
pairing mode after a solid white light and then the light flashes red and white alternately.
2. Activate Bluetooth on the device, and choose "SOUNDPEATS RunFree Lite" on Bluetooth List to
pair.
Reset
1. Plug a Type-C cable into the charging port and make sure the headset is in charging status.
2. Press and hold the power button for 3s until the light flashes red and white alternately twice.
The headset restores to the factory setting which will take 4s.
3. Unplug the cable and turn on the headset, the reset is complete.
Wearing
1. Identify the left and right.
2. Rotate the headset to find the most comfortable fit.
Touch Control
Power On
Manually: Press and hold the power button for 3s
Power Off
Auto: Automatically turns off after 3min of disconnection
Manually: Press and hold the power button for 3s
Play / Pause
Press the power button
Volume-
Press the volume- button

SoundPeats RunFree Lite Specifications

General

Bluetooth Version	5.3
Water Resistance	IPX4
Driver Size	16.2 mm
Wireless	Yes
Connection Range	10 meters
Frequency Response	20Hz-20kHz
Microphone	Yes
Charging Port	USB-C
Type	Open-ear
Weight	27.2 grams