Do you have a question about the Southwire 11050N and is the answer not in the manual?
Model | 11050N |
---|---|
Category | Multimeter |
Brand | Southwire |
Display | LCD |
Battery | 9V |
Continuity Test | Yes |
Diode Test | Yes |
Display Type | Digital |
Safety Rating | CAT III 600V |
Type | Digital Multimeter |
AC Current Range | 0-10A |
DC Voltage Range | 200mV to 600V |
DC Current Range | 200µA to 10A |
Safety rules and operating instructions must be read and understood before using the meter.
Freezes the display reading. Press HOLD to activate or exit.
Turn on the display backlight by holding the HOLD button for >1 sec.
Records maximum and minimum readings. Press MAX/MIN to activate and exit.
Explains automatic and manual range selection modes for measurements.
Explains symbols shown on the multimeter's LCD screen.