5
Important - please read these instructions fully
before starting assembly
General safety warnings
Personal Safety (continued)
• Before each use, inspect the mower to check the cutting
blade, fastening bolts and the entire cutting unit for
any signs of wear or damage. To prevent imbalance or
vibration, worn or damaged cutting blades and fastening
bolts must always be replaced in full.
• Damaged parts on the mower must be replaced by
qualied personnel. Use only genuine spare parts.
• Repair work on the electrical parts of the lawn mower may
only be carried out by a qualied electrician.
• Follow the instructions to t or remove the blade and
wear protective gloves.
• The user remains responsible for any injury to third
parties within the working area of the lawn mower whilst
the lawn mower is being used.
• Only work in good daylight or appropriate and adequate
articial light.
• Never use the mower when you are tired.
• Never run the mower in enclosed or poorly-ventilated
rooms or if there are ammable or explosive uids,
vapours or gases nearby.
• If the mower has struck a foreign object, switch o the
motor and disconnect the mains lead before you inspect it
or clear any blockages in the grass ejection area.
• Always use the lawn mower with the grass collection box
correctly tted.
• Ensure that you do not push the mower over areas that
might damage or snare the power cable.
To Next Page
Loading...
