4. Attach new bulb.
Attach bulb with
same 3 screws using
a No. 2 Phillips head
screwdriver.
1
2
5. Insert bulb back into locking ring and rotate clockwise
until bulb clicks/locks into place.
WINTERIZING: Follow steps 1 - 3 and install enclosed red
winterizing cap to replace bulb. Store bulb indoors to opti-
mize product longevity.
1. Attach terminal cover to plug using No. 2
Phillips head screwdrivier.
2. (Recommended) Store plug within niche
during winter period.
For syncing light with automation please see our Multi Plus Set Up guide
enclosed or visit spaelectrics.ca for tutorials.
To Next Page
Loading...
