What to do if my Spacelabs Healthcare 90217A displays 'LLL' and sounds an alarm?
If your Spacelabs Healthcare Blood Pressure Monitor displays 'LLL' and an alarm sounds, this indicates a low main battery condition. Power OFF the monitor immediately.
What does event code 'Lbb' mean on my Spacelabs Healthcare Blood Pressure Monitor during self-testing?
If your Spacelabs Healthcare Blood Pressure Monitor (model 90207) displays the event code 'Lbb' during self-testing, it indicates a low backup battery condition. Replace the backup battery before continuing.
Why is the display incorrect on my Spacelabs Healthcare 90217A?
An incorrect display on your Spacelabs Healthcare Blood Pressure Monitor may be due to low or no power. Check the batteries and replace or recharge them if necessary. Alternatively, it could be due to time-out, an air leak in the system, using the wrong cuff size, or the cuff not being properly attached. Identify the cause and correct it.
What to do if the cuff is too tight on Spacelabs Healthcare 90217A?
If the cuff feels too tight when using your Spacelabs Healthcare Blood Pressure Monitor, it might be because the cuff was placed on too tightly. Try repositioning the cuff. If the air pump is staying on too long, return the monitor to Spacelabs Healthcare for service.
How to fix a cuff that is too loose on Spacelabs Healthcare Blood Pressure Monitor?
If the cuff is too loose on your Spacelabs Healthcare Blood Pressure Monitor, it may be because the cuff was placed on the patient too loosely. Try repositioning the cuff. If the air pump is not staying on long enough, return the monitor to Spacelabs Healthcare for service.
General| Device Type | Blood Pressure Monitor |
|---|---|
| Model Number | 90217A |
| Manufacturer | Spacelabs Healthcare |
| Type | Ambulatory Blood Pressure Monitor |
| Measurement Method | Oscillometric |
| Heart Rate Range | 40-200 bpm |
| Memory | Stores up to 300 readings |
| Data Storage | Internal memory |
| Interface | LCD display |
| Cuff Sizes | Small, Medium, Large |
| Battery Life | Approximately 24 hours of use |
| Data Transfer | Via USB |
Provides a general description of the Spacelabs Healthcare ABP monitors and their intended use.
Details the features and components of the 90217A ABP Monitor.
Instructions for replacing the main batteries in the ABP monitor.
Process for initializing the ABP monitor before patient monitoring.
Procedure for connecting the monitor to a report generator for initialization.
Steps to connect the monitor to a PC for initialization via software.
Instructions for establishing a modem connection for remote initialization.
Information on modem compatibility and connection procedures.
Details the monitor's automatic Office Check mode after initialization.
Guidance on patient preparation and initial safety precautions.
Instructions for properly using the cuff support accessory.
Lists available optional accessories for the ABP monitor.
Method for correlating monitor readings with manual auscultatory measurements.
Guidance for patients on using the monitor and handling common issues.
Procedures for transferring data and generating reports from the monitor.
Instructions for cleaning and disinfecting the ABP monitor and its components.
Specific steps for cleaning the cuff wrap and carrying pouch.
Procedure for removing and reinstalling the bladder from the cuff.
Explanation of event codes displayed by the monitor and their meanings.
Overview of the procedure for checking the accuracy of the ABP device.
Step-by-step guide for performing the accuracy check on the monitor.
Detailed specifications for the 90217A Ultralite ABP Monitor.
Description of the monitor's features, controls, connectors, and indicators.
General technical specifications and measurement ranges of the monitor.
Information regarding patient safety mechanisms and requirements.
Details on the power source and electrical specifications for the monitor.
Specifications for the physical size and weight of the ABP monitor.
Operating and storage conditions for the ABP monitor.
Information on the monitor's compliance with electromagnetic compatibility standards.
General notes regarding the monitor's electromagnetic compatibility.
Declaration regarding electromagnetic emissions from the monitor.
Declaration regarding electromagnetic immunity of the monitor.
Further guidance on electromagnetic immunity for the monitor.
Guidelines for separation distances from RF communication equipment.
A checklist of common problems, their possible causes, and solutions.
Information on product servicing, warranty, and repair procedures.
Explanation of general safety symbols used on Spacelabs Healthcare products.
Explanation of symbols related to general operation and controls.
Icons representing frequently used functions and connections.
Symbols related to packaging, shipping, and handling.
Details on product certifications and regulatory compliance.
Information on the manufacturer, lot number, and serial number.
Definitions of abbreviations and symbols used in the manual.
To Next Page
