SpacePak WCSP-J Series - Step 3: Supply Air Plenum Attachment

9
STEP 3: ATTACHING SUPPLY AIR PLENUM ADAPTOR
NOTICE: If the unit is to be located in the attic and
installed through the ceiling joists, attach the supply
air plenum adaptor in the attic.
A. HORIZONTAL DISCHARGE:
Refer to Figure 2.7 and duct installation instruc-
tions supplied with fan coil unit.
14-5/16"
FIGURE 2.6: RETURN AIR BOX FRAME DIMENSIONS
M
easure return air box dimension
"A" to determine length of opening.
Height = 14-5/16"
D
WG0045
FIGURE 2.7
NOTICE: An Electric Heat Module cannot be installed
in the WCSP-J model (due to resulting blower
housing obstruction).