- 04 -
DISPLAY SCREEN DESCRIPTION
1.
2.
3.
4.
USB-C input voltage.
Battery power percentage.
30W fast input or output.
USB-A or USB-C output voltage.
5. “START” in green, the device is ready to start your car.
“START” in yellow, the voltage of car battery is too low, press the and
together to use the boost function, then jump start your car when the “START”
in green.
“START” in red, the positive and negative is connected reversely between
the jump clamps and car battery, please reconnect it correctly.
2
1
3
4
5
HOW TO USE THE BOOST FUNCTION
ZETA 2000 is designed to jump start 12-Volt lead-acid batteries, the “START”
will be in yellow if the voltage of the car battery is too low. You can press the
power button and the light button at the same time for 3s to activate the
BOOST FUNCTION.
WARNING: Disable safety protection and manually forces "BOOST
FUNCTION", only for use when a battery voltage is too low to be detected.
To Next Page
Loading...