To Next PageTo Next PageWhat to do if my spanesi MINIBENCH Lifting Systems does not work?
If your Spanesi Lifting System isn't responding, the issue might stem from a few things. First, check the power distribution board and ensure the master switch is correctly positioned. If that's not the problem, the electric motor may be burnt out and require replacement. Alternatively, the pump could be out of order, also necessitating a replacement.
Why spanesi MINIBENCH Lifting Systems has difficulty in moving up?
If your Spanesi Lifting System struggles or fails to ascend, consider these potential causes: * The control unit tank might have insufficient oil. Check the tank level and replenish the oil if needed. * A worn pump can also lead to ascent issues; consider replacing it. * The ascent-descent solenoid valve could be jammed or faulty, requiring inspection and potential replacement.
How to fix insufficient flow rate in spanesi MINIBENCH?
If you're experiencing insufficient flow rate with your Spanesi Lifting System, it could be due to insufficient hydraulic circuit operating pressure. Check the pump operating pressure on the pressure gauge and replace the pump if necessary.
General| Brand | spanesi |
|---|---|
| Model | MINIBENCH |
| Category | Lifting Systems |
| Language | English |
Provides an overview of the manual's purpose and the MINIBENCH.
Details compliance with EEC Directive 89/392 and CE certification.
Specifies the intended use of the MINIBENCH for vehicle lifting and repairs.
Describes the MINIBENCH's physical structure and key components.
Details the components and function of the pull system.
Explains the information provided on the lift's identification plate.
Reports the aerial noise level emitted by the machine during operation.
Lists the technical specifications and dimensions of the MINIBENCH.
Explains the importance of safety and the different types of hazard warning signs.
Details various safety signs affixed to the lift and their meanings.
Provides load capacities for the MINIBENCH with and without the pull system.
Recommends appropriate clothing and personal protective equipment.
Provides guidance on environmental considerations and waste disposal.
Outlines essential safety precautions for operating the lift.
Details safety procedures to be followed during maintenance operations.
Outlines general installation procedures and checks before starting.
Guides on selecting a safe and suitable installation location for the MINIBENCH.
Covers pre-installation checks of technical systems in the workshop.
Details the process of removing the MINIBENCH and positioning it for installation.
Provides instructions for correctly connecting the lift's pneumatic system.
Details the correct procedure for connecting the lift's electrical system.
Explains how to remove and install the pull arm and its accessories.
Essential checks and familiarization before operating the lift.
Instructions for verifying the functionality of emergency stop and reset buttons.
Step-by-step guide to test the emergency stop button's operation.
Guide to test the proper function of the reset button.
Identifies and explains the functions of controls on the console panel.
Explains different ways to use the MINIBENCH for repairs or with the pull system.
Detailed instructions for safe lifting and lowering of the MINIBENCH.
Procedure for using the MINIBENCH as a simple lift without the pull arm.
Instructions for using the MINIBENCH with the pull bar system for vehicle straightening.
Steps to attach the pull arm to the MINIBENCH for safe operation.
Guidance on operating the MINIBENCH with the adjustable pull arm.
Procedure for safely detaching the pull arm from the MINIBENCH.
Overview of safety devices protecting the operator.
Description of the device preventing unintended descent.
Explanation of the valve preventing lift descent on pipe breakage.
Details on the function and locking mechanism of the emergency stop button.
Describes the function of the reset button for power restoration.
Explains the low voltage circuit for minimizing electrical risks.
Details the motor protection against overload or overheating.
Explains the purpose of safety warning signs for operator and machine.
Lists standard accessories supplied with the MINIBENCH.
Lists accessories specifically supplied with the adjustable pull arm.
Overview of the MINIBENCH's electrohydraulic and pneumatic systems.
Presents the functional diagram of the MINIBENCH hydraulic system.
Presents the functional diagram of the MINIBENCH pneumatic system.
Presents the functional diagram of the pull arm's hydraulic-pneumatic system.
Provides the electrical system diagram for the MINIBENCH.
General advice on maintaining the MINIBENCH for longevity.
Details daily, weekly, and monthly maintenance tasks.
Guidelines for specialized maintenance and disposal.
Lists common faults, their possible causes, and recommended solutions.
Instructions on how to order spare parts and required information.
Lists the exploded drawings available for parts consultation.
