Required Materials
While the RTK Surveyor is nicely enclosed you will need a few cables and antennas to make everything work.
We'll go into the specifics of how to hook things together but in general you will need to get a good quality L1/L2
antenna:
Depending on your setup you may want to use your phone for RTCM correction data. If a source is not available
online, you will need a 2nd RTK Surveyor setup in base mode and a radio link connecting the Base to the Rover.
Again, we'll go into details but we designed RTK Surveyor to work with these 500mW 915MHz telemetry radios out
of the box:
GNSS Multi-Band L1/L2 Surveying Antenna
(TNC) - TOP106
To Next Page
Loading...
