Hardware Overview
The RTK Surveyor is a fully enclosed, preprogrammed device. There are very few things to worry about or
configure but we will cover the basics.
Switches
GPS-RTK2 Hookup Guide
Get precision down to the diameter of a dime with the
new ZED-F9P from u-blox.
Setting up a Rover Base RTK System
Getting GNSS RTCM correction data from a base to a
rover is easy with a serial telemetry radio! We'll show
you how to get your high precision RTK GNSS system
setup and running.
How to Build a DIY GNSS Reference Station
Learn how to affix a GNSS antenna, use PPP to get its
ECEF coordinates and then broadcast your own RTCM
data over the internet and cellular using NTRIP to
increase rover reception to 10km!
To Next Page
Loading...
