RX Command Code Response Description
R POWER POWER ON SHOW POWER STATUS
R SOURCE SOURCE Comp, PC, DVI SHOW SOURCE STATUS
R OUTPUT OUTPUT NATIVE~WUXGA SHOW OUTPUT STATUS
R SIZE SIZE FULL~PANSCAN SHOW SIZE STATUS
R PICTUREMODE PICTUREMODE STANDARD~USER
SHOW PICTURE MODE STATUS
CONTRAST CONTRAST 0~100 SHOW CONTRAST STATUS
R BRIGHTNESS BRIGHTNESS 0~100 SHOW BRIGHTNESS STATUS R HUE
HUE 0~100 SHOW HUE STATUS R SATURATION
SATURATION 0~100 SHOW SATURATION STATUS
R SHARPNESS SHARPNESS 0~100 SHOW SHARPNESS STATUS
R NR NR OFF~HIGH SHOW NR STATUS
R PCHPOSITION PCHPOSITION 0~100 SHOW PC H-POSITION STATUS
R PCVPOSITION PCVPOSITION 0~100 SHOW PC V-POSITION
R PCCLOCK PCCLOCK 0~100 SHOW PC CLOcK STATUS
R PCPHASE PCPHASE 0~63 SHOW PC PHASE STATUS
R COLORTEMP COLORTEMP NORMAL~USER SHOW COLOR TEMP STATUS
R RED RED 0~100 SHOW COLOR TEMP RED STATUS
R GREEN GREEN 0~100 SHOW COLOR TEMP GREEN
R BLUE BLUE 0~100 SHOW COLOR TEMP BLUE STATUS
R OSDHPOSITION OSDHPOSITION 0~100 SHOW OSD H-POSITION STATUS
R OSDVPOSITION OSDVPOSITION 0~100 SHOW OSD V-POSITION STATUS
R OSDTIMEOUT OSDTIMEOUT 0~100 SHOW OSD TIMEOUT STATUS
R OSDBACKGROUND OSDBACKGROUND 0~8 SHOW OSD BACKGROUND STATUS
R AUDIOMUTE AUDIOMUTE OFF~ON SHOW AUDIO MUTE STATUS
R AUDIODELAY AUDIODELAY OFF~150MS SHOW AUDIO DELAY STATUS
k auto EXECUTE AUTOADJUST R
HDCPKEY > HDCPKEY ON/OFF Show HDCPKEY status
S HDCPKEY 0 > HDCPKEY OFF Input HDCP off
S HDCPKEY 1 > HDCPKEY ON Input HDCP on
To Previous Page
Loading...