23
EN
INSTALLATION
Before using the remote control for the rst time, remove
the cover on the back to insert the batteries. The remote
control uses two AAA 1.5V batteries. In the event that the
remote control stops responding, replace the batteries with
new ones of the same type.
Connect one end of the HDMI cable to the HDMI connector
(3) on the box and the other end to one of the HDMI
connectors on your television. To connect the SPC Alien to
the power supply, connect the AC DC power supply cable
into the AC DC power socket (1) on the back of the SPC
Alien and then plug the AC DC power supply cable into the
power source.
To Next Page
Loading...