SPC SMARTEE DUAL CORE - Network Connection Setup; Wi-Fi Configuration

To Next Page

To Previous Page

Select the corresponding HDMI input where you have

connected the Smartee Dual Core in your TV trough the

corresponding TV settings menu. If you have selected the

correct HDMI you will see the starting Smartee Dual Core

displays.

For connect the device to your Wi net, select the “Settings”

option in the main menu:

In the rst option, ensure that the WiFi is activated,

, or if isn’t, press on the switch until

you see the “ON” word.

The device makes an automatic wireless network

search, and it shows the ones it nds in the right side.

Select the network to which you want to connect,

pressing on it. If it’s a secure network, the device will

ask you to input the password.

Then the device will try to connect to the network, and

if satisfactory, under the network name you will see

“Connected” word.