16
STARTING THE TOWER OF SOUND
Tighten the wooden base that comes with the equipment
to the tower base using the supplied screws and washers.
Connect the power cord to the mains and place the On/
Off switch (12) in the On position. Then press the Standby
button (11) to turn on the tower. In case you are not going
to use the tower sound in a short time, place the On/
Off switch in the Off position so that the tower does not
consume electricity.
TOWER SOUND FUNCTIONING
Press the MODE button (7) to select the source you want
to play music from. On the display will appear the selected
mode. Press the key each time you want to change
between modes:
BT (Bluetooth): Activate the Bluetooth function.
Connect your Bluetooth device to the tower sound like
any Bluetooth device.
RADIO: FM Radio. To set a FM preset, tune the
frequency you want to save and then keep pressed
the Play/Pause button (9). The screen will show the
To Next Page
Loading...
