Spectra Engineering RELM BK Radio MX800 T19 User Manual

Base Station, Repeater, Receiver and
Transmitter
MX800 -T19 Option
T19 Technical Manual

Spectra Engineering RELM BK Radio MX800 T19 Specifications

General

Brand	Spectra Engineering
Model	RELM BK Radio MX800 T19
Category	Computer Hardware
Language	English

Summary

1. T19/26 Line Interface Board

1.1 Installation

Details the steps and components required for installing the T19/T26 option board into the MX800 radio.

1.4 Variable & Stepped Tone Encoder

Covers variable and stepped tone encoding for conveying signal strength information to a central arbiter.

1.5 Status Tone Encoding & Decoding (T19 only)

Details the functionality for monitoring MX800 status via superimposed audio tones for encoding and decoding.

1.6 Five Tone Encoded / Decoder (SELCALL)

Explains the Selective Calling (SELCALL) protocol for squelch control and remote radio control.

1.7 Motorola TRICK Emulation

1.10 T19/T26 Jumper Settings

2. Software Menu System

2.1 Configuration Menu

Encoder Configuration Menu

Decoder Configuration Menu

Hardware Configuration Menu

Tone Remote Control Configuration Menu

Selcall Configuration Menu

Calibration Menu

3. Setting up HyperTerminal

Creating a HyperTerminal connection

Guides users through creating a new connection in HyperTerminal, setting communication parameters for the T19/T26 option board.

4. Firmware Upgrade

4.1 Upgrade Procedure

Outlines the procedure for upgrading the firmware on T19/T26 option boards using a serial port and bootloader.