English
43
The Office Power Kit required for this serial connection is
designed to let you power the receiver from an AC outlet
rather than from the receiver battery (see illustration
above).
When applied to the receiver’s DC input, the external
power source has priority over the internal battery, which
means the battery can be left safely inside the receiver (it
won’t be drained).
IMPORTANT: Be sure you align the red markings (a red dot
on the connector, a red line on the socket) before pushing
the Lemo connector in. Conversely, when it’s time to
disconnect the Lemo connector, please use the attached
metal strap to pull the connector out.
• Through USB. Connect the SP60 to the computer via the
USB-to Mini Universal cable provided.
The first time you make this connection, the required USB
driver will be installed automatically on the computer to
make that connection possible.
When using the receiver’s USB port, you can still use the
previous setup to power the receiver through its DC input
(in this case, you don’t need to connect the DB9
connector of the Power/Data cable to the computer).
To Next Page
Loading...
