To Next PageTo Next Page
Need help?Do you have a question about the Spectra Watermakers Newport 400 and is the answer not in the manual?
General| Brand | Spectra Watermakers |
|---|---|
| Model | Newport 400 |
| Category | Water System |
| Language | English |
Unpacking and inspecting system components for damage and completeness.
Essential guidelines for thru-hulls, pipe fitting, and wiring for proper system setup.
Guidance on mounting strainer, flush, boost, and feed pump modules for optimal installation.
Instructions for relocating the membrane pressure vessel and connecting high-pressure tubing.
Instructions for routing hoses and tubes, making connections, and preventing kinks.
Step-by-step guide for correctly assembling Parker tube fittings for leak-free connections.
Information on identifying and connecting cables for control system, boost pump, and power.
Procedures for initial system power-up, checks, and testing to ensure correct operation.
Method for testing the watermaker using artificial seawater if boat testing is not feasible.
Steps for starting the system using the Auto Run feature for normal operation and priming.
How to adjust flush water pressure and feed pump speed for optimal flushing.
Understanding and operating the automatic store cycle, including flush functions.
Procedures for operating the system manually in case of control failure or specific tasks.
Guidelines for storing the watermaker system when not in use to prevent biological growth.
Instructions for protecting the system using antifreeze (Propylene Glycol) for cold weather storage.
Routine checks and servicing for seawater strainer, prefilters, and charcoal filter replacement.
Steps for cleaning reverse osmosis membranes to restore performance and remove fouling.
How to calibrate the salinity probe for accurate product water salinity readings.
Recommended spare parts kits for various cruising durations and system components.
Information on the types of display panels, their connection, and function.
How to install and configure tank switches for automatic watermaker operation and tank filling.
