STEP 1
Connect Red
Battery Wire
A Using a screwdriver, remove the screw from the bottom of the battery
backup, and slide the battery cover o.
B Pull the battery out a few inches, and slide the red wire into the red terminal.
C Insert the battery back into the device. Slide the cover back on and
tighten the screw.
battery backup
battery cover
screw
battery
battery wires
STEP 2
Connect Battery Backup
to Electrical Outlet
A Connect the power cable to the battery backup, and plug the
other end into an electrical outlet.
power cable
DC power
connector
battery connector
back of battery backup
power
(from wall)
power
(to modem)
battery port
(to modem)
electrical outlet
power cable
STEP 3
Connect Battery Backup
to Modem
Important: If you are connecting the battery backup to a modem you have
already installed, disconnect the power cable from the modem before
connecting the battery backup.
A Plug the DC power connector into the power port on the battery
backup, and plug the other DC power connector into the power
port on the modem.
B Plug the battery connector into the battery port on the battery
backup, and plug the other end into the battery port on the modem.
C The Battery light on the front of the modem will be blue and blinking while
the battery backup charges and turn solid blue when it’s fully charged.
back of battery backup
back of modem
DC power
connector
DC power connector
battery connector
battery
connector
To Previous Page
Loading...