29
CL & PSL50 Series
REASSEMBLY
Step 16: Reinstall air channel and filters
Replace the air lter(s) back onto the
red air channel.
Fit the air channel back into its
housing, ensuring the cut-outs align
with the mixer steam trap(s).
Note:
The air channel and lters are held in place by the mixers/steam traps. The air
channel must be correctly and fully reinstalled to allow the mixers/steam traps
to be reinstalled correctly.
i
Pro Tip:
The easiest way to ensure that the air channel is reinstalled correctly is to make
sure that the cut-outs are facing out toward the front of the dispenser and
downwards, and generally centred over the mixer locations.
To Next Page
Loading...
