Need help?Do you have a question about the Spica TC-50 and is the answer not in the manual?
Frequency and Impedance| system resonance frequency | 56 Hz |
|---|---|
| input impedance | 4 ohms nominal, minimum 3.6 ohms @4 kHz |
| frequency response | 60 Hz - 17 kHz |
Drivers and Crossovers| woofer size | 6.5 inch treated paper cone |
|---|---|
| tweeter size | 1 inch impregnated cloth dome |
| woofer crossover | 4th order Bessel response |
Sensitivity and Power| sensitivity | 84dB @1 watt, 1 meter |
|---|---|
| power handling continuous | 50 watts |
| power handling peak | 100 watts |
Dimensions and Weight| width | 13 inches (33.0 cm) |
|---|---|
| height | 15.5 inches (39.4 cm) |
| depth | 11.6 inches (29.5 cm) |
| net weight | 20 lbs (9.07 kg) each |
Outlines the manual's organization and purpose for users.
Welcomes users, lists essential TC-50 components and what to check.
Lists basic tools needed for setting up the SPICA TC-50 speakers.
Step-by-step guide for connecting TC-50 speakers to audio equipment.
Explains the recommended break-in period for optimal TC-50 performance.
Explains why speaker placement is crucial for natural tonal balance and stereo imaging.
Recommends rigid stands and lists criteria for choosing the best ones.
Introduces geometric principles for optimal speaker placement within a room.
Guides on setting equal distances from speakers to listening position for stereo imaging.
Details on adjusting speaker height and tilt for optimal sound projection.
Discusses amplifier characteristics and power needs for TC-50 speakers.
Advises on choosing quality speaker wire and using equal lengths for balanced sound.
Explains how speaker spacing affects soundstage width and imaging detail.
Provides a method to determine and correct audio system polarity.
Discusses using subwoofers, loudness controls, and rumble filters with TC-50s.
To Next Page