Spider Gear SpiderPro Hand Strap v2 - User Manual

Spider Pin
Metal Washer
Handstrap
Rubber Washer
USE WITH SPIDER PLATES
IMPORTANT:
Spider Pin must be tightened with provided wrench.
Spider Pin should be
checked regularly to ensure
that it is tightened adequately.
Connector
Metal Washer
Handstrap
Rubber Washer
Arrange parts as shown and attach to the camera body.
USE WITH SLING/SWIVEL STRAPS
SPIDERPRO
HAND STRAP v2
x2
Adapter Screw x2
Adapter 2
Adapter 1
USE WITH SPIDER PIN
IMPORTANT:
The rubber washer must be underneath the
SpiderPro Handstrap to prevent rotation.
The 1/4”-20 screw should be checked regularly
to ensure that it is tightened adequately.
1/8”
Allen Wrench
1/4”-20 Screw
Metal Washer
Handstrap
Rubber Washer
MORE INFORMATION ONLINE
Arrange pieces as shown and attach to the camera
body using the included screw and Allen wrench.
Visit our website at the link below:
SPIDERHOLSTER.COM/SPIDERPRO-HANDSTRAP-V2
USE WITH PROVIDED HARDWARE
SPIDERPRO
Plate
SPIDERLIGHT
Plate
USE WITH TRIPOD PLATES
SPIDER
ArcaSwiss +
Manfrotto Plate
SPIDER
Tether
Plate
SPIDER
ArcaSwiss
Plate
IMPORTANT:
All tripod plates should be checked regularly
to ensure that they are properly tightened.
ANY Third
Party Tripod
Plate
Spider Camera Plates attach to the universal
tripod connection on the bottom of your camera.
(DSLR)
(Mirrorless)
IMPORTANT:
Remove any existing rubber washer
from the sling strap connector.
Using any third party connection
voids the warranty on this item.
Do not use the SpiderPro
Hand Strap as a handle
for grabbing or carrying
your camera.
Improper use can lead to damage of
this product and/or your equipment.
Read all instructions carefully, and
watch the installation and setup
video on our website.

Spider Gear SpiderPro Hand Strap v2 Specifications

General

Brand	Spider Gear
Model	SpiderPro Hand Strap v2
Category	Camera Accessories
Language	English