EasyManua.ls Logo

Spin Spa Spinning Spa Brush - Attachments and Features; Pumice Stone; Microdermabrasion Attachment; Massage Attachment

Spin Spa Spinning Spa Brush
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USING YOUR SPIN SPA:
1. Align and attach the desired
attachment to the Spin Spa
Head (See illustration #6).
2. To change attachments, pull
outwards (See illustration #7).
3. Apply soap to the brush
attachment.
4. Press on/o button, to activate
Spin Spa (See illustration #8).
5. Adjust speed by pressing
the hi/low button (see
illustration #9).
CLEANING YOUR SPIN SPA:
1. Rinse soap from attachments with warm water after every use, allow
attachments to dry completely before reattaching to the handle.
2. Wipe Spin Spa with a damp cloth.
INSTALLING/CHANGING
THE BATTERIES:
Spin Spa requires three (3) AA Batteries
1. Push button A, then slide Battery
door o to install batteries (see
Illustrations #3 & #4)
2. Insert 3 new AA batteries.
Do not get water into battery
compartment.
Do not open compartment while
showering.
Be sure that you and appliance are
completely dry before opening the
battery door.
3. Slide the battery door back on,
ensuring it slides under rails (B).
ATTACHMENTS/FEATURES:
B. Microdermabrasion
Attachment
D. Cleansing
Attachment
C. Massage
Attachment
A. Pumice Stone
E. Mesh Sponge
A. Pumice Stone: Smooths rough and calloused skin. Use with light
pressure. Limit use to 3-4 seconds at a time
B. Microdermabrasion Attachment: Exfoliates skin and can be lled with
your favorite liquid soap (see below instructions)
C. Massage Attachment: Gentle cleaning and soothes aches and pains
D. Cleansing Attachment: Gentle Cleaning
E. Mesh Sponge: Gentle Exfoliation
Illustration #6
Illustration #3
Illustration #5
Illustration #4
Illustration #7
Illustration #8 Illustration #9
1. Ensure unit is turned o.
2. Remove the attachment by pulling away from
the handle.
3. Pull the plug out on the side of the head
(see Illustration #1).
4. Pour in a small amount of your favorite
liquid soap (see Illustration #2).
5. Secure the plug and reattach the attachment
to the unit’s head.
Illustration #1
Illustration #2
hi/low on/off hi/low on/off
NOTE: To Fill The Microdermabrasion
Attachment With Soap
A
B (rails)
NOTE: The Spin Spa is designed for use in the shower. Do not
submerge or use in the bathtub.