Ball Float Steam Trap
FT 14
Description :
FT - 14 ball float steam trap is a condensate drain trap of Cast
Iron body and Stainless Steel internals.
Available Sizes and Pipe Connections :
40 and 50 NB screwed BSPT / NPT
Note : Available Non-IBR only.
Available types and Limiting Conditions :
FT 14 TV with Thermostatic air vent
FT 14 SLR with Steam lock release
Maximum operating conditions :
Type PMO TMO
0
FT 14-4.5 4.5 bar 156 C
0
FT 14-10 10 bar 184 C
0
FT 14-14 14 bar 198 C
Note :
PMO Maximum Operating Pressure
TMO Maximum Operating Temp.
Body Design Conditions :
0
16 barg at 120 C
0
13 barg at 220 C
Cold Hydraulic test pressure 32 barg.
Material :
Sr. Part Material Standard
No.
1. Body Cast Iron IS 210 FG 260
2a) Cover Bolts Carbon Steel H.T.IS 1367 Gr. 8.8
b) Cover Buts Carbon Steel H.T.IS 1367 Gr. 8
3. Cover Gasket Reinforced exfoliated Graphite
4. Cover Cast Iron IS 210 FG260
5. Main Valve Assly. Stainless Steel ASTM A 276
with Erosion Deflector Type 304
6. Main Valve Assly. Reinforced exfoliated Graphite
Gasket
7. Main Valve Assly. Carbon Steel H.T.IS 1367
Studs & Nuts 40 Gr 8
& 50 NB
8. Ball Float Stainless Steel Type 304 ASTM A-240
9. Air Vent Assly. Stainless Steel Type 316 ASTM A-240
10. Air Vent Seat Gasket Stainless Steel Type 304 ASTM A-240
*11 SLR Unit Stainless Steel Type 410 ASTM A-276
*12 SLR Unit Gasket CRCA IS513
*13 SLR Seat Stainless Steel Type 410 ASTM A-276
*14 SLR Seat Gasket Stainless Steel Type 304 ASTM A-240
15 Diflector Plate Stainless Steel Type 304 ASTM A-240
*Items not shown. See overleaf.
Dimensions (approx.) in mm. :
Size A B C D E F Weight
40 NB 270 127 110 244 200 274 17.5 kg
50 NB 300 140 125 250 205 286 22 kg
General Tol : k3
spirax
To Next Page
Need help?
General
