To Next PageTo Next Page
Need help?Do you have a question about the Spirit STRAWMAN and is the answer not in the manual?
Connect the (B) Knee Poles to the (A) Base using quick connect push buttons and pre-drilled holes.
Slide the (H) Boots onto the (B) Knee Poles and rest them on the (A) Base.
Attach the (C) Poles to the (B) Knee Poles using quick connect push buttons and pre-drilled holes.
Slide the (I) Foam Tubes over the (B, C) Poles.
Slip each pant leg of the (Q) Pants over the (I) Foam Tubes, ensuring (C) Poles emerge from the top.
Attach the (D) Body Frame to the (C) Poles using quick connect push buttons and pre-drilled holes.
Bring the (Q) Pants up over the hoop on the (D) Body Frame.
Plug in the adapter, step pad (optional), and external speaker (optional) into the Function Control Box.
Slip the (O) Shirt onto the (D) Body Frame with the opening facing the back.
Slide the prongs of the (E) Shoulder Frame into the housings at the top of the (D) Body Frame.
Attach the (F) Neck Frame to the (D) Body Frame using a quick connect push button and pre-drilled hole.
Slide the (J) Left Arm up the left sleeve of the (O) Shirt.
Set the forked hook of the (J) Left Arm into the housing on the left side of the (D) Body Frame.
Slide the (K) Right Arm up the right sleeve of the (O) Shirt.
Set the forked hook of the (K) Right Arm into the housing on the right side of the (D) Body Frame.
Attach the sleeves of the (O) Shirt to the wrists of the (J, K) Arms using hook and loop closures.
Set the (M) Collar over the (F) Neck Pole.
Set the pole at the bottom of the (L) Head into the (F) Neck Pole and tighten the thumbscrew.
Attach the (M) Collar to the (L) Head using hook and loop closures.
Attach the Sensor to the inside of the (O) Shirt using a hook and loop closure.
Connect all cables from the Function Control Box to their corresponding cables by color and shape.
Close the back of the (O) Shirt using hook and loop closures.
Place the (N) Hat onto the (L) Head and secure using hook and loop closures.
Tie the (P) Rope Belt around the waist of the Strawman.
Infrared sensor distance is related to ambient and body temperature differences.
Do not use the item in environments with air currents from windows, AC, or outlets.
Avoid facing the infrared sensor directly towards a heat source like a heater.
Instructions for connecting and using the optional Step Pad or Try Me Button.
Instructions for connecting an external speaker to the prop for sound output.
Instructions for connecting a transponder for use with a Multi-Prop Remote.
Instructions for installing batteries into the Spirit Battery Adapter for power.
Plug the power adapter into an outlet and adjust settings on the Function Control Box.
Details on Sensor, Continuous 'I' On, and 'O' Off/Try Me modes, plus volume control.
Connect the (B) Knee Poles to the (A) Base using quick connect push buttons and pre-drilled holes.
Slide the (H) Boots onto the (B) Knee Poles and rest them on the (A) Base.
Attach the (C) Poles to the (B) Knee Poles using quick connect push buttons and pre-drilled holes.
Slide the (I) Foam Tubes over the (B, C) Poles.
Slip each pant leg of the (Q) Pants over the (I) Foam Tubes, ensuring (C) Poles emerge from the top.
Attach the (D) Body Frame to the (C) Poles using quick connect push buttons and pre-drilled holes.
Bring the (Q) Pants up over the hoop on the (D) Body Frame.
Plug in the adapter, step pad (optional), and external speaker (optional) into the Function Control Box.
Slip the (O) Shirt onto the (D) Body Frame with the opening facing the back.
Slide the prongs of the (E) Shoulder Frame into the housings at the top of the (D) Body Frame.
Attach the (F) Neck Frame to the (D) Body Frame using a quick connect push button and pre-drilled hole.
Slide the (J) Left Arm up the left sleeve of the (O) Shirt.
Set the forked hook of the (J) Left Arm into the housing on the left side of the (D) Body Frame.
Slide the (K) Right Arm up the right sleeve of the (O) Shirt.
Set the forked hook of the (K) Right Arm into the housing on the right side of the (D) Body Frame.
Attach the sleeves of the (O) Shirt to the wrists of the (J, K) Arms using hook and loop closures.
Set the (M) Collar over the (F) Neck Pole.
Set the pole at the bottom of the (L) Head into the (F) Neck Pole and tighten the thumbscrew.
Attach the (M) Collar to the (L) Head using hook and loop closures.
Attach the Sensor to the inside of the (O) Shirt using a hook and loop closure.
Connect all cables from the Function Control Box to their corresponding cables by color and shape.
Close the back of the (O) Shirt using hook and loop closures.
Place the (N) Hat onto the (L) Head and secure using hook and loop closures.
Tie the (P) Rope Belt around the waist of the Strawman.
Infrared sensor distance is related to ambient and body temperature differences.
Do not use the item in environments with air currents from windows, AC, or outlets.
Avoid facing the infrared sensor directly towards a heat source like a heater.
Instructions for connecting and using the optional Step Pad or Try Me Button.
Instructions for connecting an external speaker to the prop for sound output.
Instructions for connecting a transponder for use with a Multi-Prop Remote.
Instructions for installing batteries into the Spirit Battery Adapter for power.
Plug the power adapter into an outlet and adjust settings on the Function Control Box.
Details on Sensor, Continuous 'I' On, and 'O' Off/Try Me modes, plus volume control.
The Spirit Strawman is an animated Halloween prop designed for indoor or covered porch use, featuring lights, sound, and animation. It is intended for decorative purposes and is suitable for individuals 15 years of age and older.
The Strawman prop is designed to create a spooky atmosphere with its animated movements, sound effects, and lighting. It can be activated in three different modes:
The prop includes a volume control dial on the Function Control Box, allowing users to adjust the sound level or turn it off completely.
The Strawman prop is assembled from various components, including a base, poles, a body frame, boots, foam tubes, arms, a head, and dressing elements like a collar, shirt, hat, and rope belt. The assembly process involves connecting these parts using quick connect push buttons and pre-drilled holes, ensuring all cables are connected by color and shape to the Function Control Box.
Optional accessories enhance the prop's functionality:
The device complies with Part 15 of the FCC Rules, meaning its operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received. Users are cautioned that changes or modifications not expressly approved by the responsible party could void their authority to operate the equipment. The equipment has been tested and found to comply with Class B digital device limits, designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try corrective measures such as reorienting the receiving antenna, increasing separation between equipment and receiver, or connecting the equipment to a different circuit.
General| Brand | Spirit |
|---|---|
| Model | STRAWMAN |
| Category | Home Lighting Accessories |
| Language | English |
