EasyManua.ls Logo

Spitzer WALL PACK Series - Troubleshooting and Maintenance; Troubleshooting Common Issues; Care and Maintenance Guidelines; Post-Installation Checks

Default Icon
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WALL PACK SERIES
FOOTBALL WALL PACK
INSTALLATION MANUAL
www.spitzerlighting.com
702 Interchange Blvd., Newark, DE 19711 Specication is subject to change without notice
2/2
AFTER INSTALLATION
1. Do all the wires connect in a correct a way as the pictures show?
2. Is the ground lead installed appropriately?
3. Make sure the photocell functions well.
CARE AND MAINTENANCE
CAUTION: Before attempting to clean the xture, disconnect the power to the xture by turning the breaker off or
removing the fuse from the fuse box. This LED light xture is made from quality materials that will last many years
with minimum care and maintenance. You may want to clean the xture with a soft cloth periodically. To maintain
the best appearance of the xture, do not use cleaners with chemicals, solvents or harsh abrasives. Do not use
liquid cleaner on the LEDs, LED driver, or wiring inside the light xture.
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Light will not come on A. Light switch is
turned off.
B. Fuse is blown or
circuit breaker is
turned off.
C. Incorrect circuit
wiring
A. Turn light switch on
B. Replace fuse or turn
circuit breaker on
C. Verify that xture is
wired properly